Warrior 1418 TUBE DOOR MIRROR BRACKET (1955–1975 Jeep CJ5) Manuel d'utilisateur télécharger pdf (Page 1)

Protecting Your Adventure Lifestyle

========================================================================================

QUALITY • INTEGRITY • INNOVATION • SERVICE

Warrior Products, Inc.

16850 SW Upper Boones Ferry Rd

Ste. A

Durham, OR 97224

Phone (888) 220-6861

Fax (503) 692-0364

TUBE DOOR MIRROR BRACKET

INSTALLATION INSTRUCTIONS

WAR 1418

NOTE: These mirror brackets will fit any tube door with a 1_” outer tubing diameter. Mirrors are not

included in this kit. Any OEM or aftermarket mirror designed to fit an 87-02 Wrangler will work with

this kit.

Installation:

1. Locate a spot on your tube door where you would like to mount your mirror brackets

2. Use the 6mm bolts and nuts to clamp the bracket to the tube door.

3. Drop your mirror into the bracket and secure with the factory nut on the bottom.

4. Sitting in your driver seat with the tube door closed; set the mirror’s angle to the desired position

and lock it into place by tightening the mirror to the bracket securely. Do not over tighten as you

may damage the mirrors.

5. Finish the installation by hand adjusting the mirror lens to your preferred position.

Warrior also carries a full line of mesh covers, padding kits, and door limiting straps for your Tube

Doors. Go to www.warriorproducts.com to view additional accessories available for your tube doors.

If you need further assistance installing your product, please contact us by email at

[email protected] or call us at (888) 220-6861.

THANK YOU FOR PURCHASING WARRIOR PRODUCTS

Protecting Your Adventure Lifestyle========================================================================================QUALITY •

Pas de commentaire

Warrior 1418 TUBE DOOR MIRROR BRACKET (1955–1975 Jeep CJ5) Manuel d'utilisateur Page 1